Description
-
High density, double-conversion on-line power protection with scalable runtime
-
Includes: CD with software, Communication cable, Documentation CD, Installation guide, Removable support feet, USB cable, Warranty card
APC Smart-UPS SRT 1000VA 230V
High-density, double-conversion on-line power protection with scalable runtime
Includes: CD with software, Communication cable, Documentation CD, Installation guide, Removable support feet, USB cable, Warranty card
- Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- ECO Mode
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
- LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
- Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Protection
Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used.
Cold-start capable: Provides temporary battery power when the utility power is out.
Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input Power Factor Correction: Minimizes installation costs by enabling the use of smaller generators and cabling.
Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.
Scalable runtime Allows additional run time to be quickly added as needed.
Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.
Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.
Hot-swappable batteries Ensure clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Technical Specs
Max Configurable Power (Watts) 1.0kWatts / 1.0kVA
Output Voltage Distortion Less than 2 %
Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz Sync to mains
Other Output Voltages 220, 240
Load Crest Factor 3: 1
Topology Double conversion online
Waveform type Sine wave
Bypass Built-in bypass
Input frequency 40 – 70 Hz Auto-sensing
Input voltage range for main operations 50 – 150 40% load, 80 – 150V
Number of Power Cords 1
Other Input Voltages 220, 240
Battery type Lead-acid battery
Included Battery Modules 1
Typical recharge time 3hour(s)
Nominal Battery Voltage 48 V
Expected Battery Life (years) 3 – 5
RBC Quantity 1
Battery Charge Power (Watts) 97 Watts
Extendable Run Time 1
Interface Port(s) RJ-45 Serial, Smart-Slot, USB
Control panel Multifunction LCD status and control console
Audible Alarm Audible and visible alarms prioritized by severity
Emergency Power Off (EPO) Yes
Available SmartSlot™ Interface Quantity 1
Surge energy rating 432Joules
Maximum Height 432MM, 43.2CM
Maximum Width 85MM, 8.5CM
Maximum Depth 505MM, 50.5CM
Net Weight 20.5KG
Shipping weight 29.6KG
Shipping Height 246MM, 24.6CM
Shipping Width 594MM, 59.4CM
Shipping Depth 749MM, 74.9CM
Color Black
Units per Pallet 12.0
Operating Temperature 0 – 40 °C
Operating Relative Humidity 0 – 95 (Non-condensing) %
Operating Elevation 0 – 3048meters
Storage Temperature -20 – 50 °C
Storage Elevation 0 – 15240meters
Audible noise at 1 meter from the surface of unit 50.0dBA
Online thermal dissipation 317.0BTU/hr
Protection Class IP20
Approvals CE, EAC
Standard warranty 3 years repair or replacement (excluding battery) and 2 years for battery
Reviews
There are no reviews yet.