Description
Professional II+ Series (1P/1P) – Rack/Tower- Standard Models
- Model PRO903-ERS / Railkit for data rack cabinet additional cost.
- Warranty 2 Years / 1 Year BatteryProfessional II+ Series (1P/1P) – Rack/Tower Consist of:
- 3KVA/2700Watts
- 1-phase in / 1-phase out
The Professional II+ Series (1P/1P) Rack/Tower is a single-phase UPS system that uses microprocessor-controlled true online double conversion technology to provide protection for critical loads, especially on IT applications.
At a glance
True double-conversion
Microprocessor control
Input power factor correction
Smart SNMP
Converter mode (optional)
Output power factor 0.8
True double conversion online technology
Smoothed out power fluctuations so that there would be less damage to downtime issues that could cost millions.
Generator compatible
Works with a generator as a power source and converts perfect power to the connected loads.
LCD display
Useful information such as battery health and power conditions are shown at a glance through the LCD display.
Emergency Power Off function
Safety feature that will immediately disconnect the UPS loads from utility power in the event of an emergency to ensure there’s no risk of electrical shock when fire extinguishers or sprinklers are set off inside the room.
(Optional for 1~3kVA, built-in for 6 – 10kVA)
SPECIFICATIONS
Capacity PRO903-ERS 3KVA: 3000VA / 2700W
UPS type Tower
Input phase Single phase with ground
Input nominal voltage For 3000VA
Input voltage range
110-300VAC (Based on load at 50%)
160-280VAC (Based on load at 100%)
Input frequency 40 – 70Hz
Input power factor ≧ 0.99 @ nominal voltage (100% load)
Output voltage regulation ±1%
Output frequency
Synchronized range: 47 – 53Hz or 57 – 63Hz
Battery mode: 50Hz ± 0.25Hz or 60Hz ± 0.3Hz
Output current crest ratio 3:1
Output harmonic distortion
≦ 3% THD (Linear load)
≦ 6% THD (Non-linear load)
Battery type and number
3000VA – 12V/9Ah x 6pcs
Battery recharge time 4 hours to 90% capacity
Alarm
Battery mode – Sounding every 4 seconds
Low battery – Sounding every second
Overload – Sounding twice every second
Faulty – Continuously sounding
LCD indicators
Load level, battery level, AC mode, battery mode, bypass mode, and fault indicators
Front panel
Status LED, function keys, LCD display
Communication
Smart RS232 and USB port
Prices are subject to change without prior notice.
Reviews
There are no reviews yet.